Stay Connected
Search for ITS Standards
|
SAE J2355
ITS Data Bus Architecture Reference Model Information Report A reference model for an in-vehicle data bus. The ITS data bus (IDB) will enable manufacturers, dealers, and vehicle owners to install a wide range of electronics equipment reliably and safely in a vehicle at any time during the vehicle lifecycle. For more information on how to obtain standards: https://www.sae.org/ Phone: 877-606-7323 |
Current Published Version:
Version 1, Published in Oct 1997 SDO(s): SAE |
|
SAE J2365
Calculation of the Time to Complete In-Vehicle Navigation and Route Guidance Tasks Guidelines for the implementation of specific man-machine interface transactions and classes of transactions. For more information on how to obtain standards: https://www.sae.org/ Phone: 877-606-7323 |
Current Published Version:
Version 201607, Published in Jul 2016 Previous Development Activity: Version 1: Published (May 2002) SDO(s): SAE |
|
SAE J2366/1
ITS Data Bus - lDB-C Physical Layer A physical interface device (connector) that will ensure compatibility between vehicles and aftermarket devices. Physical interface performance requirements, circuit identification and configuration, and electrical requirements for the physical layer of the ITS data bus. 
For more information on how to obtain standards: https://www.sae.org/ Phone: 877-606-7323 |
Current Published Version:
Version 1, Published in Nov 2001 SDO(s): SAE |
|
SAE J2366/1L
ITS Data Bus - Low Impedance Stereo Audio This SAE Recommended Practice describes the Low Impedance Stereo Audio (LISA) bus, which may be used in conjunction with the Physical Layer of the IDB-C, as described in SAE J2366-1. The audio arbitration messages used to control access to the LISA bus are specified in SAE J2366-7. The IDB-C is a non-proprietary virtual token passing bus, designed to allow disparate consumer, vehicle, and commercial electronic components to communicate and share information.
For more information on how to obtain standards: https://www.sae.org/ Phone: 877-606-7323 |
Current Published Version:
Version 1, Published in Nov 2001 SDO(s): SAE |
|
SAE J2366/2
ITS Data Bus - Link Layer Requirements for the link layer (layer 7 of the OSI model) for the ITS data bus.
For more information on how to obtain standards: https://www.sae.org/ Phone: 877-606-7323 |
Current Published Version:
Version 1, Published in Nov 2001 SDO(s): SAE |
|
SAE J2366/4
ITS Data Bus - Thin Transport Layer Requirements for the thin transport layer (Layer 4 of the OSI model) for the ITS data bus.
For more information on how to obtain standards: https://www.sae.org/ Phone: 877-606-7323 |
Current Published Version:
Version 1, Published in Mar 2002 SDO(s): SAE |
|
SAE J2366/7
ITS Data Bus - Application Message Layer Requirements for the application layer (layer 7 of the OSI model) for the ITS data bus.
For more information on how to obtain standards: https://www.sae.org/ Phone: 877-606-7323 |
Current Published Version:
Version 1, Published in Apr 2002 SDO(s): SAE |
|
SAE J2367 ITS Data Bus Vehicle Gateway Reference Design Recommended Practice |
Obsolete
|
|
SAE J2369
Standard for ATIS Message Sets Delivered Over Reduced Bandwidth Media A general framework allowing transmission of traveler information via bandwidth reduced media such as found in wireless applications. Creates a uniform coding and message structure for link travel times, incident text, weather and transit for broadcast delivery.
For more information on how to obtain standards: https://www.sae.org/ Phone: 877-606-7323 |
Current Published Version:
Version 1, Published in Mar 2000 SDO(s): SAE National ITS Architecture |
|
SAE J2372
Field Test Analysis Information Report This information report presents the results of field tests on location-referencing standards. For more information on how to obtain standards: https://www.sae.org/ Phone: 877-606-7323 |
Current Published Version:
Version 1, Published in Dec 1999 SDO(s): SAE |